GREASE.ORG Precision Lube banner, 970 by 250
GREASE.ORG Happy Diner banner, 728 by 90

Super Lube O-Ring Grease

O-ring silicone grease

Silicone grease is a thickener, often silica, holding a silicone oil such as polydimethylsiloxane. On an O-ring it does two jobs. It lubricates the rubber so the ring slides into a groove without tearing, and it helps the seal seat. Plumbers, divers, mechanics, and instrument techs all keep a small tube for that reason. The photograph on this page is a retail silicone grease sold for O-rings. The sentence on the old page was only the product name. This is the explanation.

Petroleum grease is the wrong product for many elastomers. Mineral oil swells natural rubber, EPDM, and some other seal compounds. The ring grows, sticks, and then cracks. Silicone oil is the usual choice for those compounds. It is not universal. Silicone rubber itself can be damaged by silicone oil, and a few plastics craze. The seal maker's compatibility chart beats a guess. If the chart names a specific grease, use that grease.

Dielectric grease is a close cousin. It is also a silicone grease, sold for spark-plug boots and electrical connectors. It keeps water out and does not conduct electricity. It is not a bearing grease, and it should not be packed into a rolling bearing. In a connector, a thin film is enough. A heavy dab attracts dust and can push a pin out of contact. On an O-ring, a thin film is also enough. A ring that is buried in grease may not seal, because the extra grease occupies the space the rubber needs.

Silicone grease is a poor choice for most metal-to-metal bearings, chains, and open gears. Those parts need a petroleum or synthetic oil held by a lithium, polyurea, or calcium thickener, with the additives the load requires. NLGI grade and dropping point, which matter on a chassis grease, are not how you pick an O-ring grease. You pick it for elastomer compatibility and for whether the joint sees potable water or food.

Food and drinking-water equipment can require a silicone grease with a listed rating for incidental contact. An unlabeled shop tube does not qualify. Do not substitute choice white grease, yellow grease, or any kitchen fat. Those are commodities from rendering and fryers. Do not substitute white lithium grease either. It is a petroleum lubricant and can swell the very seal you are trying to install.

GREASE.ORG keeps this page so the silicone product is not confused with lubricating grease or with food grease. Clean the groove, put a thin film on the ring, and seat it without twisting. If the seal is in a kitchen machine that touches food, stop and read the rating on the tube before it goes into service.

GREASE.ORG Food grease and cooking oil recycling banner, 728 by 90
Super silicone greases
GREASE.ORG Grease biofuels banner, 500 by 350